Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
inserted into the appropriate sockets of the control panel of the oven according to
their colour, i.e. a black connector should be inserted into a socket marked with the
same colour.
7. Complete the installation of the appliance and fix the oven with 4 screws (fig. 2,
right side).
2.4 Electrical connection
Instructions for the installer (qualified professional)
❖ The cooker is manufactured to work with three-phase alternating current
(400V3N~50Hz). Remember that the connection wire should match the
connection type and the power rating of the cooker. The connection cable must be
secured in a strain-relief clamp. The ground wire must be connected to the marked
clamp of the terminal. The electric supply of the appliance must be equipped with
an emergency switch with a distance between the contacts of at least 3 mm which
disconnects the entire appliance from the mains in a case of emergency. Read the
information on the rating label and the connection diagram before connecting the
appliance to the mains.
❖ When the socket is not accessible for the user or a fixed electrical connection of
the appliance is required, an all-pole disconnecting device must be incorporated
during installation. Disconnecting devices are switches with a contact opening
distance of at least 3 mm. These include LS-switches, fuses and protectors (EN
30335).
33
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
