Hand-held vacuum cleaner
NOTICE – Risk of Damage to
Material and Property
■
The device should only be used if it
has been fully and correctly assem-
bled! The dust container, the fi lter
holder and the fi lters must be inser-
ted and must not be damaged! If dirt
were to get inside the motor unit, this
could damage the motor.
■
Use only original accessories from the
manufacturer in order to guarantee
that there is no interference that may
prevent the device from working and
to avoid possible damage.
■
Do not place heavy objects on the
device or connecting cable.
■
Make sure that the connecting cable
is not squashed, bent or laid over
sharp edges and does not come
into contact with hot surfaces. Do
not wind the mains cable around the
mains adapter.
■
When you pull the mains adapter out
of the plug socket, always pull on the
mains adapter and never the mains
cable!
■
Protect the device from heat, naked
fl ames, extreme temperatures, per-
sistent moisture, wet conditions and
collisions.
NOTICE – Risk of Damage to
Material and Property from
Batteries
■
Remove a dead battery from the de-
vice immediately. Clean the contacts
before a new battery is inserted.
■
The battery must not be taken apart,
thrown into a fi re, immersed in liquids
or short-circuited.
09234_Inlay_DE-EN-FR-NL_A5_V2.indb 15
09234_Inlay_DE-EN-FR-NL_A5_V2.indb 15
ACCESSORIES
•
The electric fl oor nozzle (J) is suitab-
le for both carpets and hard fl oors. It
has a rotating cleaning brush to make
it easier to pick up hair and fl uff.
•
The brush nozzle (B) is used for vacu-
uming upholstery and textiles and for
removing dust from delicate objects
such as picture frames, lamp shades,
keyboards, books etc.The brush head
can be pivoted 360°.
•
The crevice nozzle (H) is suitable for
places which are hard to get to, such
as corners, crevices or recesses, e.g.
for upholstery and cleaning the inside
of cars.
•
The extension tube (G) makes it ea-
sier to reach the tops of cupboards,
ceilings and corners and, along with
the electric fl oor nozzle, allows fl oors
to be cleaned.
•
The holder for the brush and crevice
nozzle (B) is suitable for securing the
two nozzles to the extension tube
easily to save space.
•
The wall bracket (C) is suitable for
storing the device in a space-saving
manner. The mains cable of the mains
adapter (E) can be tucked in on the
small hook on the wall bracket.
•
The turbo upholstery nozzle (A) is
suitable both for small surfaces, fur-
niture and for sucking up animal hair.
By switching over the transparent
cover, the nozzle sucks either at the
bottom or front (ideal for backrests of
upholstered furniture, for example).
EN
15
21.09.2020 17:20:24
21.09.2020 17:20:24