Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7. Mounting accessories
- Adjustable shelves
The walls of the appliance are equipped with a series of guide profiles so
that the shelves can be inserted if desired.
- Installing the door compartments
To store food of different sizes, the door compartments can be set to different
heights. Proceed as follows: gradually pull the compartment in the direction
of the arrows until it comes loose and put it in the desired position.
8. Storing food
See Section 4 "Use".
3.2 REVERSING THE DIRECTION IN WHICH THE DOOR OPENS
•
To remove the door, the appliance must be tilted backwards. We recommend doing this with two people. Rest
the appliance on a firm surface so that it does not slip away as you reverse the door.
•
Keep all removed parts to remount the door later.
•
Do not lay the appliance down flat. This can damage the cooling system. If the appliance does have to be
placed on its back or side for some time during this process, it must be able to stand upright for four hours
before connecting it to prevent damage to the internal components.
Necessary tools:
•
Crosshead screwdriver
•
Flat head screwdriver
!
ATTENTION!
The freezer door direction cannot be changed and must remain in place.
•
Adjustable spanner
•
Masking tape
1.
Unplug and empty the appliance.
2.
A. Remove the top cover, screws and top hinge.
B. Remove the clasp on the left side and install it on
the right side.
Top hinge
29
Advertenties
Hoofdstukken
Inhoudsopgave
