Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
360-45011
390-40011
5. SETTINGS
You can easily program and set the different parameters on the daylight control module by means
of the 4 control keys (see 'Quickguide').
5.1. General set (see 'Quickguide', A and D)
In this menu, you can:
Select the type of application (10.01, 11.01, 12.01, 13.01, 14.01)
Select the number of active channels (1, 2 of 3 zones/ruimtes)
Select the mode:
- Custom: In this mode, you can modify the settings and parameters of the daylight control
module.
- Backup: In this mode, you can view the saved settings and parameters of the daylight
control
module.
- Factory:
In this mode, the daylight control module operates according to the fabric settings.
You can only view these settings, you can not modify them.
Select operating mode with or without DIM memory:
- With DIM memory: If the system switches from automatic to manual mode, the light level in all
active channels is identical to the light level at the moment the manual mode has been exited.
- Without DIM memory: If the system switches from automatic to manual mode, the light level is
max. in all active channels.
5.2. Adjustment (see 'Quickguide', B, C and D)
In this menu, you can:
Set the daylight factor:
The daylight factor is the relation between the actual daylight level (lx ind) in a zone and the daylight level
measured by the light sensor. The parameters for the daylight factor should be measured at a moment of
the day when there is sufficient daylight and there is NO influence of artificial light. Parameters:
50
EN
Advertenties
Inhoudsopgave
