Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
360-45011
390-40011
activity, or if a sufficient light level has been reached in the room, the light switches off automatically
after a preset time.
For use in e.g. office/conference premises.
Application 13.01:
2-channel daylight control module, 1 channel on/off, automatic off via motion sensor
(fig.4d)
General lighting:
The 2-channel daylight control module is switched on and off via a push button (170-00000)
(door). For as long as the motion sensor detects activity, the light is controlled in 2 channels in
accordance with the set parameters. As the daylight incidence increases/decreases, the light dims
down/up in the premises in order to reach the required, min. light level. If the motion sensors do
not detect activity, or if a sufficient light level has been reached in the room, the light switches
off automatically after a preset time. Option for manual on/off and dimming via I/O (170-40100).
For use e.g. school premises.
Blackboard lighting:
The 1-channel on/off control module is switched on and off via a push button (170-00000)
(blackboard). The light is switched on for as long as the motion sensor detects activity. The light
switches off automatically after a preset time, if the motion sensors do not detect activity. If the
general lighting is switched off via 170-00000 (door), the blackboard light is also switched off.
Application 14.01
Manual on/off via button, automatic off via external time switch 05-183 (fig.4e)
The 3-channel daylight control module is switched on and off via a button. The light is controlled in
3 channels in accordance with the set parameters. As the daylight incidence increases/decreases,
the light dims down/up in the premises in order to reach the required, min. light level. The light
is switched off automatically if a sufficient light level has been reached, or via an external time
switch. For use in e.g. production premises.
EN
49
Advertenties
Inhoudsopgave
