Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
■ Electronics
● You may not reconstruct, self-repair, or disassemble the
Garment Steamer. This can damage the device.
● Maintenance, modifications, and repairs may only be carried
out by the manufacturer, a professional workshop appointed
by the manufacturer, or a similarly qualified person.
● Check the device from time to time for damage. Never use
the device if it shows signs of damage.
● Do not use any other mains plug for this device. This can
cause failure and/or damage.
● Make sure your mains socket supplies the correct power
voltage to avoid damage to the device.
● Only connect the device to an earthed mains socket.
● The mains socket must be located near the device and be
easily accessible.
● To avoid possible safety risks, unplug the mains plug from
the mains socket if you do not use the device for an
extended period, and before cleaning.
● Never force the mains plug of the power cord into a mains
socket; if it does not fit easily into the mains socket, stop
using it. Always make sure that the mains plug of your
device is properly connected to the mains socket.
● If the power fails during the operation, turn off the device
immediately and pull the mains plug from the mains socket.
● If smoke is produced, or there are any unusual sounds or
smells, switch off the Garment Steamer immediately and
remove the mains plug from the mains socket. In these
cases, the Garment Steamer should not be used until it has
been inspected by the manufacturer, or a similarly qualified
person. Never inhale smoke from a potential device fire. If
you have inhaled smoke, however, consult a doctor. The
inhalation of smoke can be harmful.
● For safety reasons, always unplug the device in case of a
thunderstorm.
■ Power Cord
● Fully unwind the power cord before use.
● Do not modify the power cord.
● Check the power cord periodically for damage. Never use
the power cord if there are any signs of damage.
● Do not touch the power cord if it is damaged. A damaged
power cord can cause a deadly electric shock. First, power
down the respective mains socket (e.g. via the respective
circuit breaker) and then carefully pull the mains plug from
the mains socket. Never use the device if the power cord is
damaged.
● To prevent risks, damaged power cords may only be
replaced by the manufacturer, a professional workshop
appointed by the manufacturer, or a similarly qualified
person.
● Never pull the mains plug from the mains socket by pulling at
the power cord. Always pull it from the mains socket using
the intended grips.
● Do not carry the Garment Steamer by the power cord or use
the power cord as a handle.
- 36 -
Advertenties
Inhoudsopgave
Probleemoplossen
