Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
The pump is
damaged.
Not enough steam
There is not
comes out.
enough water in
the water tank.
The Garment
Steamer is not fully
preheated.
The Garment
The plug is not
Steamer does not
connected or the
heat.
device is not
switched on.
Water is leaking.
The water tank is
too full.
The water tank is
damaged.
If you encounter
any problems,
please contact us
for assistance.
Top up the water to
the maximum level.
Let the Garment
Steamer preheat
for at least 25
seconds before
clicking the steam
button.
Plug in your
Garment Steamer
and switch it on.
Fill the water tank
to the maximum
level, do not overfill
it.
If you encounter
any problems,
please contact us
for assistance.
- 33 -
There is spitting
The Garment
of water.
Steamer is not fully
preheated before
use.
The water
remaining after the
last use became
condensation water
and was stored in
the steam head.
The pump is
damaged.
The steam leaves
You use water with
stains on the
additives.
fabric or the
Garment Steamer
The water in your
spits out.
house is too hard.
Let the Garment
Steamer preheat
for at least 25
seconds before
clicking the steam
button.
After each use,
empty the water
tank and turn on
the Garment
Steamer to heat the
Garment Steamer
for about 2 minutes
to dry the
remaining water.
If you encounter
any problems,
please contact us
for assistance.
Never add any
additives to the
water tank.
We recommend
using distilled
water.
Advertenties
Inhoudsopgave
Probleemoplossen
