Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
e) Push the water tank back
into the garment steamer
until it clicks into place.
Make sure the water tank is
fully seated.
③ Attach or Replace an Accessory:
WARNING:
Before replacing or attaching an accessory, unplug your
Garment Steamer and allow it to cool down (risk of
scalding).
● Just click the accessory on the steam head.
● Plug in the power cord after the accessory is attached or
replaced.
NOTES:
- Your Garment Steamer is
designed to operate using
tap water. If your fabric is
important or delicate, purified
or demineralized water is
recommended.
- If your water is too hard, it is
recommended to use
distilled water.
④ Steaming:
● There are 2 steam modes:
- LOW steam mode: One spray 18 ±3g/min.
This steam mode is enough for the wrinkle removal of light
clothes and your daily dresses. It is ideal for spring and thin
summer clothing.
- HIGH steam mode: One spray 28 ±3g/min
This steam mode can generate higher steam output and can
penetrate steam into fabric areas more thoroughly, de-
wrinkling the most stubborn creases of your clothes. It is
ideal for autumn and thick winter clothing.
a) Short press the ON/OFF
button to start preheating
and set the steam level.
After 25 seconds, the
preheating is finished and
the device is ready for
steaming.
- 30 -
b) Press the steam button with
the steam brush facing
away from you and hold the
Garment Steamer in a
vertical position.
Advertenties
Inhoudsopgave
Probleemoplossen
