⑤ Power off:
Long press the ON/OFF button to turn off
the device, and then long press the
automatic cleaning button to turn the
automatic cleaning function on or off.
Remark:
a) Let the heater cool down and run the automatic cleaning
function 30 minutes later. We recommend using purified
water for automatic cleaning.
b) Hot water is sprayed during automatic cleaning, so keep a
distance of 1 meter to avoid scalding.
■ After Use
● Unplug the Garment Steamer and remove the water tank
from the main body.
● Empty the water tank.
● Put the water tank back in its place.
● Place the device vertically on a flat surface and wait for the
Garment Steamer to cool down.
WARNING:
Never touch the steam plate of the Garment Steamer
after use.
TROUBLESHOOTING
Problem
There is no
steam.
- 32 -
Cause
Solution
The Garment
Check that your
Steamer is not
Garment Steamer
connected or not
is properly
switched on.
connected and
turned on.
The water level is
Unplug your
too low.
Garment Steamer
and refill it.
The water tank cap
If the water tank
is not installed (a
cap is not installed,
rattling sound is
the unit may not
heard) or properly
function properly
closed.
because the pump
can only operate
when closed. The
operating process
is accompanied by
a rattling sound.
Don't forget to put
the cap on and
close it well
enough.