Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
V200
PARTS AND ACCESSORIES
1.
On/off switch pedal
2.
Cord rewinder pedal
3.
Power control knob
4.
Dust full indicator
5.
Telescope tube
6.
Hose
7.
Textile nozzle
8.
Combi nozzle
9.
Floor brush
10. Turbo brush
11. Handle
12. Lock clip for front cover
13. Outlet grille
14. Slider for outlet grille
OPERATING MODE
1.
Connect the hose accessories:
Press the adaptors at both sides of the hose end, and insert the hose into the hose socket.
2.
Connect the telescope tube to the curved hose end.
Adjust the length of the telescope tube by pushing its locking button down and pulling out the tube.
3.
Connect the different nozzle tools/floor brush to the tube for different cleaning purposes.
Floor brush: This brush has two positions. One for hard and one for soft/textile surfaces. Choose the right
one.
Turbo brush: This brush is used for cleaning the animal hairs.
4.
Turn on the appliance:
Hold the plug and pull out the cord, then insert the plug into the power socket. Make sure that the power
supply corresponds to the required power mentioned on the rating label. Press the on/off switch pedal to
turn on the power. Rotate the power control knob. Adjust the power to the required level depending on
the cleaning function.
- 13 -
EN
Advertenties
Inhoudsopgave
