Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH
FUSE CHECK/REPLACEMENT
NOTE
All machine electrical circuits are protected by auto-resettable electronic devices. The safety fuses activates only in case
of serious damage.
It is recommended to have the fuses replaced by qualified personnel only.
Refer to the Service Manual available at any Nilfisk Retailer.
SAFETY FUNCTIONS
The machine is equipped with the following safety functions.
EMERGENCY PUSH-BUTTON
The emergency push-button (5) is located in an easily accessible position. Press it firmly in case of immediate necessity to stop all
machine functions.
To reset the machine operation, lift the recovery tank assembly (17) and reconnect the battery connector (6).
ANTI-SKID SAFETY SYSTEM
This system reduces the speed when turning and when the machine tilts laterally to avoid sudden skids, this increasing the machine
stability in any condition. The system activation is confirmed when the icon (48-H) appears on the display.
DRIVER'S SEAT MICROSWITCH
It is located inside the driver's seat (12) and it does not allow the machine drive system to operate if the operator is not seated on
the driver's seat.
ELECTROMAGNETIC BRAKE
It is built-in the rear driving wheels (24) and keeps the machine braked when the machine is off or stopped.
24
INSTRUCTIONS FOR USE
SCRUBTEC R 253 - 9100000391
01/2015
Advertenties
Hoofdstukken
Inhoudsopgave
