Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Lowering the floor-tool
Fig.26
After preparing the floor (see previous section), we are now ready to set the controls to suit the cleaning conditions.
Before any settings can be applied, ensure the brush deck is lowered (Fig.29).
Move the floor-tool lever, to it's lower position (Fig.27).
Note: The machine will still reverse with the floor-tool in the lowered position, this could possibly damage the
blades. Raise the floor-tool (Fig.26) before selecting reverse.
Lowering the brush deck
Note: If the brush width has not been set, see 'Setting the width adjustment' on page 12 before proceeding.
Fig.28
The control for lowering the brush deck can be found to the rear right of the machine (Fig.28).
Lower the brush deck by releasing the left foot pedal to the upper position (Fig.29).
Machine Operation
20
Fig.27
Fig.29
Advertenties
Inhoudsopgave
