Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Functioning
The solar panel
electrical energy and stores it in the rechargeable battery.
The product will automatically light on as it begins to get dark.
The LEDs are a very long-life and energy-saving light source.
The light duration depends on the amount of sunlight, the angle
of light on the solar panel
able battery capacity is temperature-dependent). A vertical angle
of light at temperatures above the freezing point is ideal. The re-
chargeable battery does not achieve maximum capacity until
after several charge and discharge cycles.
In summer a completely drained rechargeable battery takes
about 2 to 4 days to fully recharge in constant sunlight.
Before use
Note: Remove all packaging materials from the product.
Installation
For model B and C (see Fig. B):
1. Push the ground spike
.
2
2. Slide the solar panel housing
ment
if this has not been pre-installed.
2
3. Push the ground spike
flower bed) so it is firmly positioned upright in the ground.
4. Make sure it is firmly positioned. Do not use any force when
assembling or setting up the product, e.g. hammer blows.
This will damage the product.
For all models:
For optimal results, set up the product in a location where the
solar panel
5
amount of time. Do not put the product under bushes, trees,
canopies etc. as this reduces the incidence of incoming sunlight.
Position the product in such a way that the solar panel
covered or in the shade.
Note: Make sure the solar panel
light sources, e.g. yard- or street lighting, or the product will not
switch on at twilight.
12 GB/IE/NI
installed in the product converts sunlight into
5
and the temperature (the recharge-
5
into the ground spike attachment
3
for enough into the ground (lawn,
3
is exposed to sunlight for the longest possible
over ground spike attach-
1
is not impacted by other
5
is not
5
Advertenties
Hoofdstukken
Inhoudsopgave
