Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
12.1 What to do if...
In any cases not included in this table please
contact an Authorised Service Centre.
Problem
The appliance does not
heat up.
The display shows
"12.00".
The lamp does not work.
13. ENERGY EFFICIENCY
13.1 Product Information Sheet and Product Information according to EU
Energy Labelling and Ecodesign Regulations
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conventional mode
Energy consumption with a standard load, fan-forced mode
Number of cavities
Cause and remedy
The fuse is blown. Make
sure that the fuse is the
cause of the malfunction.
If the problem persists,
contact a qualified electri‐
cian.
There was a power cut.
Set the time of day.
The lamp is burnt out.
Replace the lamp. Refer
to "Care and cleaning",
Replacing the lamp.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C
heat-resistant lamp.
4. Install the glass cover.
12.2 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is located
on the front frame of the appliance. It is
visible when you open the door. Do not
remove the rating plate from the appliance.
We recommend that you write the data
here:
Model (MOD.) :
Product number (PNC):
Serial number (S.N.):
AEG
BEK435060M 944188243,944188404
EB40M 944188532
81.2
A+
0.99 kWh/cycle
0.69 kWh/cycle
1
ENGLISH
29
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
