Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Before first use
remove packaging elements,
gently (slowly) remove labels from the
oven door, trying not to break the glue
tape. If any visible trace is left on the
glass, warm up the oven chamber (see
below), spray the warmed-up glass with
a glass cleaner, and wipe off with a soft
cloth.
empty the drawer, clean off factory pre-
servatives from the oven chamber,
take out and wash the oven fittings with
warm water and a little washing-up liq-
uid,
switch on the ventilation in the room or
open a window,
heat the oven (to a temperature of 250°C,
for approximately 30 min.), remove any
stains and wash carefully.
when handling the cooker, follow the
safety instructions carefully.
The oven chamber should only be washed
with warm water and a small amount of
washing-up liquid.
Important!
In ovens equipped with the electronic pro-
grammer, the time "0.00" will start flashing
in the display field upon connection to the
power supply.
The programmer should be set with the cur-
rent time. (See Electronic programmer ). If the
current time is not set operation of the oven
is impossible.
17
Advertenties
Hoofdstukken
Inhoudsopgave
