Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Types of cylindrical brushes available
485 mm-models
POLYPROPYLENE 0.40
HARD NYLON 0.60
SOFT NYLON 0.45
Cylindrical brush application guide (suggestions only)
Models
General cleaning:
Concrete
Terrazzo floor
Ceramic tiles/quarrystones
Marble
Vinyl tiles
Rubber tiles
Squeegee installation
1.
Install the squeegee (25) and fasten it with the handwheels (26), then connect the vacuum hose (15) to the squeegee.
2.
Adjust the squeegee with the handwheel (27) so that the rear blade - in all its length - touches the floor.
Guide to match squeegees and brush/pad-holder decks
Deck model
Deck with one brush (18a), brush diameter: 530 mm
Deck with two brushes (18b), brush diameter: 305 mm
Deck with two cylindrical brushes (18c), brush length: 485 mm
Solution or washing water tank filling
NOTE
If the machine is equipped with Chemical Mixing System (switch (77) (optional)) the tank must be filled with clean water,
otherwise the tank must be filled with solution.
1.
Open the filler neck (8).
2.
(For machines without Chemical Mixing System)
Use the rear filler neck (41) or the front filler neck (37) to fill the tank (20) with a solution suitable for the work to be performed.
Do not fill the solution tank completely, leave a few centimetres from the edge. Use the removable hose (17) as reference.
Always follow the dilution instructions on the label of the chemical product used to prepare the solution.
The solution temperature must not exceed 40°C.
WARNING!
Use only low-foam and non-flammable detergents, intended for automatic scrubber applications.
(For machines with Chemical Mixing System)
Fill the tank (20) with clean water by using the rear filler neck (41) or the front filler neck (37).
Do not fill the clean water tank completely, leave a few centimetres from the edge.
The water temperature must not exceed 40°C.
9097058000(2)2009-10 A
POLYPROPYLENE 0.40
SCRUBTEC 653B – 653BL – 651BCL – 661BL
USER MANUAL
HARD NYLON 0.60
Squeegee model
Aluminium (Fig. 7), width 760 mm
Steel (Fig. 6), width 810 mm
Aluminium (Fig. 7), width 760 mm
ENGLISH
SOFT NYLON 0.45
17
Advertenties
Hoofdstukken
Inhoudsopgave
