Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5.
Use
5.3
Tapping water
Automatic sensor water sector
•
Activate sector 2 by placing a hand
under the water outlet.
•
The water flow stops automatically
1 second after you have pulled your
hand away from the water flow.
CAUTION
Always check the temperature before you place your hands in the water stream. Risk of
burning your hands due to hot water.
Continuous water flow mode
•
Activate sector 3 & 6 at the same
time for 1 second. The water starts
flowing.
•
The water flow stops automatically 10
minutes after the activation.
•
To stop the water flow manually, hold
your hand over sector 4 or 5.
Manual sensor water sector
•
Activate sector 10.
•
Activate sector 10 again to stop water
flow.
Note: available only for miscea CLASSIC Pure W model
Adjusting the water temperature
•
Check the display for the actual
temperature.
•
To adjust the temperature:
•
Activate sector 3 to increase the
temperature. The sector shows a
red light.
•
Activate sector 6 to decrease the
temperature. The sector shows a
blue light.
You can adjust the water temperature whilst the water is flowing or when the system is in
standby mode.
You can use one hand to adjust the temperature, and hold your other hand under the water
flow to check the temperature.
4
5
24
4
Advertenties
Hoofdstukken
Inhoudsopgave
