Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3.
Description
The miscea CLASSIC and CLASSIC Pure hand hygiene systems enables you to wash your hands
without touching the system. The faucet head has different sectors with built-in infrared sensors. The
functions can be activated by moving your hands in the detection zones of the sensors.
The following faucet models are available (refer to fig. C)
1A. Standard model
1B. Small model
1C. Wall mounted model
3.1
Components
Refer to fig. C for the identification of the components.
•
Faucet (1A, 1B or 1C)
•
Water box (3)
•
Soap box (7a, 7b or 7c)
3.2
Identification of the product
Refer to fig. C for the location of the product type labels.
3.3
Application areas
miscea systems can be used in conjunction with:
•
Pressurized storage heaters
•
Thermally controlled instantaneous heaters
•
Hydraulically controlled instantaneous heaters
Operation with low-pressure displacement water heaters is not possible.
The miscea CLASSIC and CLASSIC Pure is certified according to EN1717, and is equipped with a
DIN-DVGW tested one-way valves for back-flow prevention.
4.
Installation
CAUTION
•
Do not open the water box or break the seal of the water box. If you do, the warranty
becomes void.
•
Do not connect the faucet to a water supply that has no strainer. If you do, the warranty
becomes void.
•
Do not install hoses when the faucet is switched on or when the power adapter is connected.
•
Do not hold any object close to the faucet head when the calibration is in progress. This can
block the light and interfere with the calibration.
•
Do not install or store the faucet in a location that has the risk of frost damage.
•
Be careful with the power cable of the faucet and the soap box. The connector at the end of
each cable is fragile.
•
Do not connect the water box of one set to the faucet of another set. There is a possibility that
the system does not function properly.
21
V 20.01
Advertenties
Hoofdstukken
Inhoudsopgave
