Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
•
Pull out the locking pins and remove the bolts on each
side of the grinding head.
•
Remove the wheel chassis from the grinding head.
•
Standing beside the wheel chassis, squeeze the
handle on the central hinge while simultaneously
angling the upper frame forward to the lifting position.
•
Loosen the locking knobs on the support foot.
10 – English
OPERATING
1
3
2
•
Hold the handlebar to stabilize the frame and lift out
and up the support foot.
•
Choose the appropriate position required by
tightening up the locking knobs in the correct hole.
The lower hole for a higher handlebar and greater
grinding pressure. The upper hole for a lower handlebar
and less grinding pressure.
Handle heights
Hole position
Upper
Center
Lower
Connect the vacuum cleaner
Use a Husqvarna dust extraction system for complete
dust control.
•
Connect the dust extractor to the machine. Use a 50
mm (2 inch) hose.
Make sure that the filters in the vacuum cleaner are intact
and clean. Pay attention to dust during operation.
Handle height, mm/inch
835/33
925/36
1000/39
Advertenties
Hoofdstukken
Inhoudsopgave
