BlueMarine Reef 60 Installatiehandleiding pagina 8
Verberg thumbnails
Zie ook voor Reef 60:
- Gebruiksaanwijzing (8 pagina's) ,
- Gebruiksaanwijzing (4 pagina's) ,
- Installatiehandleiding (21 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Technical installation
STEP 1
STEP 2
STEP 3
8
Place the tank (1) on the Bottom protector (16).
Place aquarium on a smooth, horizontal surface with an
adequate load-bearing capacity.
Do not place the aquarium on electrical appliances or on
furniture with surfaces which are liable to staining by water.
Please note. The total weights of the set up: aquaria
completely with water and additives (depending on type of
decoration) may be up to 120 kg.
Place the skimmer (Skim 130) in the middle section of the
internal sump. The skimmer can be used either with the pipe
and sponge or the pipe with outflow valve (this one is
preferred).
It is advisable to place the
pipe in the direction of the
water flow.
Turn the hose connector (7) to the pump (3) and
slide the hose (10) on the connector and place, at
the end of the hose, the nozzle coupling (8).
Place the pump (ReefPower 600) in the right
section of the internal sump.
GB
GB
GB
Advertenties
Inhoudsopgave
