Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
A
Preview of the appliance
Technical features
1
Check valve
2
Halves of the check valve
3
Stem
10
4
Axis
5
Holes
6
Housing
EN
B
Using the appliance
Installation (external outlet)
Before using the appliance for the first time, please consider the following tips.
Mounting the check valve
If the extractor hood is not equipped with an assembled check valve
halves onto the body of the hood. The illustrations for mounting the check valve are provided
below as an indication. The evacuation may vary depending on the model and configuration.
1
To mount the check valve
:
6
2
• Fit the two halves
into the housing
;
3
• Direct the stem
upwards;
5
4
• Insert the axis
into the holes in the
housing;
• Repeat all the operations for the other half.
Installation
If you have an external evacuation, you can connect your extractor hood as illustrated below
using an extraction duct (flexible tube made from aluminium, enamel or other non-flammable
material tube with an internal diameter of 150 mm).
1. Switch off the appliance and disconnect from the mains prior to installation.
2. For optimum results, the extractor hood should be installed at a distance of 65 to 75 cm
above the cooking surface.
11
1
, you must mount the two
EN
Advertenties
Inhoudsopgave
