Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
B
Using the appliance
4.
(Increase) button:
• Press the
(Increase) button: the backlighting of the
buttons will come on. The extractor hood starts to operate at low speed. The LED display will
indicate "1".
• Press the
(Increase) button again when the hood is operating at low speed: the backlighting of
the
(Increase),
(Reduce) and
(On/Off) buttons will come on. The hood operates at medium
speed and the LED display will indicate "2".
• Press the
(Increase) button again when the hood is operating at medium speed: the backlighting
of the
(Increase) button will go out. The
extractor hood operates at high speed and the LED display will indicate "3".
• If you press the
(Increase) button again while the hood is operating at high speed, it will
continue to operate at high speed.
5.
(Decrease) button
• Push the
(Decrease) button to lower the hood by one speed. The display shows the current
speed of operation. If you press the
(Reduced) button again while the hood is operating at high
speed, it will continue to operate at medium speed. The backlighting of the
and (On/Off) buttons will be on. If you press the
at medium speed, it will switch to low speed. The backlighting of the
(On/Off) buttons will be on. If you press the
at low speed, the hood will switch off, as will the backlighting of the
6.
(Timer) button:
• The
(Timer) button operates only when the motor and the light are on. The maximum timer
setting is 5 min. The timer can be repeated. After the elapsed time, the hood and the light will
switch off.
• After setting the timer, if you adjust the speed in the meantime, the timer delay will be recalculated.
16
(Increase),
(Reduce) and
(On/Off)
(Decrease) and
(On/Off) buttons will stay on. The
(Increase),
(Reduce)
(Decrease) button when the hood is operating
(Increase),
(Reduce) and
(Decrease) button again when the hood operates
(Decrease) button.
EN
C
Useful information
Maintenance and cleaning
CAUTION:
• The extractor hood must be disconnected from the
power source before any maintenance or cleaning. Make
sure the hood is switched off at the wall socket and the
plug is disconnected.
• External surfaces are easily scratched and scraped.
Please follow the cleaning instructions to ensure the
best possible result without damaging the appliance.
General information
Maintenance, especially cleaning, must be performed once
the appliance has cooled down. Avoid leaving alkaline or
acidic substances (lemon juice, vinegar, etc.) on the surfaces.
Stainless steel
Stainless steel should be cleaned regularly (e.g. once a
week) to ensure long life. Wipe with a clean, soft cloth. You
can also use a special cleaner for stainless steel.
17
EN
Advertenties
Inhoudsopgave
