Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
CAUTION:
behind a vehicle.
•
Make sure that the power supply is disconnected
before transportation.
•
Make sure that the electrical cable and dust extractor
hose are disconnected before transportation.
•
Remove the abrasive material before transportation.
•
The wheels let you move the product shorter
distances. For longer distances, lift the product to
move it or put the product on a vehicle.
•
Put some type of protection on the product
during transportation. The protection keeps natural
elements such as rain and snow away from the
product.
•
Engage the drive system during transportation. Refer
To engage the drive system on page 10 .
to
To move the product manually
WARNING:
are stationary before you move the product.
WARNING:
steel toe-cap and non-slip sole.
WARNING:
up and down ramps manually with the drive
system disengaged. Only move the product
manually on level ground.
1. Disengage the drive system. Refer to
the drive system on page 11 .
2. Push or pull the product by the handle.
3. Engage the drive system. Refer to
drive system on page 10 . With the motor off, this
has the function of a parking brake and prevents
accidental movement of the product.
2124 - 002 - 14.05.2024
Transportation, storage and disposal
Be careful during
Do not tow the product
Wait until all moving parts
Use protective boots with
Do not move the product
To disengage
To engage the
To move the product with the drive
system
WARNING:
there is a risk of injury if the product falls. Be
careful when you move around the product.
WARNING:
the ground during operation.
WARNING:
rearward during operation.
WARNING:
steel toe-cap and non-slip sole.
1. Engage the drive system. Refer to
drive system on page 10 .
2. Set and adjust the movement speed with the speed
control dial (A).
B
A
3. Push and hold the drive system lever (D) to move
the product forward.
4. Push and hold the overdrive button (C) to move at
maximum speed.
5. Push and hold the rearward button (B) to move the
product rearward.
To move the product up and down a
ramp
WARNING:
move the product up and down ramps. The
product is heavy and there is a risk of injury
if the product falls or moves too quickly.
The product is heavy and
Do not lift the product of
Do not move the product
Use protective boots with
To engage the
C
D
Be very careful when you
25
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
