Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2. Loosen the 3 nuts and the adjustment lever (A).
A
B
3. Hit the blastwheel cover with a rubber hammer to
adjust the blast pattern (B).
4. Turn the blastwheel cover to adjust the location of
the control cage window.
5. Make sure that the feed spout is still in the correct
position after you have adjusted the control cage.
18
6. Turn the control cage clockwise, if the hotspot is too
much on the right side.
7. Turn the control cage counterclockwise, if the
hotspot is too much on the left side.
2124 - 002 - 14.05.2024
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
