Advertenties
Beschikbare talen
Beschikbare talen
manufacturer. Always use original spare
parts. Unauthorized modifications and/or
accessories may lead to serious injury or
death to the user or others.
WARNING:
as cutters, grinders, drills, that sand or form
material can generate dust and vapours
which may contain hazardous chemicals.
Check the nature of the material you intend
to process and use an appropriate breathing
mask.
It is not possible to cover every conceivable situation
you can face when using the product. Always exercise
care and use your common sense. Avoid all situations
which you consider to be beyond your capability. If
you still feel uncertain about operating procedures after
To do before you operate the product
Note:
The operation conditions are 800 m/2625 ft
maximum altitude, temperature between -10⁰C/14⁰F to
+40⁰C/104⁰F and humidity 85%.
Note:
Read the operator's manual of the attached
equipment carefully. If specified requirements or settings
are given for the dust extractor, make sure that you obey
these.
1. Read the operator's manual carefully and make sure
that you understand the instructions.
2. Do the daily maintenance. Refer to
schedule on page 17 .
3. Make sure that the work area is clean and bright.
4. Use personal protective equipment. Refer to
Personal protective equipment on page 9 .
5. Make sure that the product is installed correctly.
6. Make sure that the battery is fully charged.
To attach the dust extraction hose
WARNING:
prevent antistatic effects.
10
The use of products such
Operation
Maintenance
Use an antistatic hose to
reading these instructions, you should consult an expert
before continuing.
Do not hesitate to contact your Husqvarna
representative if you have any more questions about the
use of the product. We will willingly be of service and
provide you with advice as well as help you to use your
product both efficiently and safely.
Let your Husqvarna dealer check the product regularly
and make essential adjustments and repairs.
Husqvarna AB has a policy of continuous product
development. Husqvarna reserves the right to modify
the design and appearance of products without prior
notice and without further obligation introduce design
modifications.
All information and all data in the operator's manual
were applicable at the time the operator's manual was
sent to print.
1. Open the hose connector.
2. Put the hose adapter in the hose connector.
3. Push the hose adapter until you hear a click to get it
in correct position.
1618 - 008 - 26.07.2023
Advertenties
