Advertenties
Beschikbare talen
Beschikbare talen
•
Attach the pressure regulator to the gas-cylinder.
•
Place the gas cylinder on the appropriate place.
•
Make sure the gas hose is not kinked or twisted and does not lie
against hot and/or sharp surfaces.
•
With the small Clifton models route the gas hose through one of
the cut-outs on the bottom side of the Clifton. To avoid tripping
over the gas hose, we strongly recommend that you cover it with
a sill profile. This sill is an accessory that you can buy at your
supplier.
•
Place the lava stones, without grit, gently on and around the
burner ring. However make sure the ignition house is still not
covered with the lava stones. So do not invert the bag with lava
stones and then spread.
• This appliance must be used, and the gas cylinder stored, in
accordance with the regulations in force
• The tubing or the flexible hose must be changed within the
prescribed intervals
•
Insert the supplied AAA battery into the electric igniter. This is
located at the front of the Clifton on the control panel. Carefully
turn the plastic ring to the left, insert the battery with the "plus"
directed outward and rotate the plastic ring back again. Make
sure the igniter is working by pressing it, when you hear a
click/click sound the igniter works properly.
EN
Advertenties
