Download Inhoudsopgave Inhoud Print deze pagina

Function; Before Use; Installation - LIVARNO LUX HG03508A Bedienings- En Veiligheidsinstructies

Led-solar-wandlamp
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Function

Solar cell
The solar cell
converts energy from sunlight
6
into electricity. Using this electricity, the installed
rechargeable batteries
battery compartment
the electricity fed by the solar cell. Fully charged
batteries deliver light for approximately 6 hours,
when the ON / OFF switch
position. In summer, completely drained batteries
take about 1 to 2 days to fully recharge in good
sunlight.
Note: The light-on time is approx. 1 hour,
assuming the battery is charged in solar cell for
about 6 hours.

Before use

Note: The solar cell
light sensor, while the sensor
to movement.
10 GB/IE/NI
are charged in the
10
. These batteries store
9
is in the "ON"
11
also works as a twi-
6
only responds
7
The "ON" position for the ON / OFF
switch
features the following
11
functions:
If the orientation light is constantly lit up, it will
automatically switch on or off once the solar
cell
detects dusk or dawn. To ensure a long
6
operating time, the LEDs will not be fully powered
in this setting. As soon as the sensor
movement, the product will switch to extra bright
light (see Fig. I). While the extra bright light is
switched on, the product will be run at full power.
Approx. 40 seconds after the last movement has
been detected, the product will return to func-
tioning as a constantly lit-up orientation light
(see Fig. H).

Installation

Note: Remove all packaging materials from
the product.
Make sure you will not be drilling into elec-
trical, gas or water lines inside the wall. Use
a power drill to drill the holes into the brick
detects
7

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Hg03508b

Inhoudsopgave