Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
12
Using the dehydrator
Fill the trays
Open the door, slide out the trays and fill them
with the required food. Do not overfill the trays
and make sure nothing sticks out at the back that
can block the ventilator. Slide the trays back in
and close the door.
Start the dehydrator
Press the ON/OFF button to start the dehydration
programme. All buttons will lit up and the display
alternating shows the last set time and duration.
The fan and the heating element start working.
Now the drying temperature and the duration may
also be changed, if required. Press the button one
more time will halt the programme.
Set the temperature
Press the TEMP button, the display flashes with the
set temperature. Hold the + or - buttons until the
temperature is set to the desired value. The
temperature can be set between 25˚C to 90˚C.
Set the time
Press the TIMER button, the display flashes with
the set duration. Hold the + or - buttons until the
duration is set to the desired value. The duration
can be set from 30 minutes up to 72 hours.
Take out your food
Once the set duration has been reached the
dehydrator will automatically stop. Open the door
and take out your trays. Be careful, the trays may
still be hot. If necessary, use some oven wants
or utensils to take the trays or food out of
the dehydrator.
Interrupt a dehydration
At any time you can stop a dehydration by
pressing the ON/OFF button. The display will
dim and only the ON/OFF button will flash. After
approximately 3 minutes, when the heater has
cooled of sufficiently, the fan will stop running.
13
Advertenties
Hoofdstukken
Inhoudsopgave
