Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5 INDUCTION HOB ONE PRO
5.1 Control Panel extraction hood
5.1.1 Control panel
8
Hob control
Indication of the timer time
Timer control keys
Locking control key
Switch hob on/off
Stop & Go control key
Power level indication
Bridge function lamp
Timer indication
Keep warm position indication
Keep warm zone control key
Zone for rear slider control
Zone for grill activation
Zone for front slider control
Zone for grill activation
5.2 Control keys and slide operation
The device is equipped with touch control keys with which you
can set the various functions. Touching the control key operates
the function. Activating a function will cause a light, reading
and/or sound signal to be displayed.
WARNING: Do not push multiple control keys
simultaneously during normal use.
In order to select power, simply glide your finger over the slider,
just below the LED indication.
You can also access a certain level directly by using your finger
to select the desired level.
0 0 0
8
min
Zone for slider control
– 62 –
5.3 Controlling the hob
5.3.1 Switch on and off
Switching the hob on and off:
Switch on
Press
and continue to hold for 2 sec
The LED will light up
Switch off
Press
LED goes out
Switching a cooking zone on and off:
Set up
Slide from left to right on the slider
(Power control)
Switch off
Slide from right to left on the SLIDER until the
0
H
display shows
or
= "Hot".
If there is no control input within 20 seconds, the electronics will
return to the wait position.
5.3.2 Pan detection
This hob is equipped with an interactive control system that
makes use of the hob even easier.
When you place a pan on the hob, it is automatically detected.
0
You will also see a
to show you which slider to use for the
zone in question. The pan detection ensures optimum safety.
The induction hob does not work:
– If there is no pan on the cooking zone or if the pan is
unsuitable for induction. In this case, it is impossible to put
the power on and the
symbol will flash on the display.
– The operation is suspended when the pan is removed from
the cooking zone during cooking. The
on the display. The
symbol will disappear when the pan is
placed back onto the cooking surface. The cooking will then
continue at the same power level as selected previously.
Switch off the cooking zone after use. The pan detection
no longer be active.
5.3.3 Indication of residual heat
After the cooking zone or hob has been switched off completely,
the hob glass will still be warm, which can be seen by
H
symbol disappears when the cooking zone glass can be
handled without danger.
Display
0
H
symbol will flash
will
H
. The
Advertenties
Hoofdstukken
Inhoudsopgave
