Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Levelling the machine
The dryer does not require a plinth. However, make
sure that any uneven areas of the floor are made
level.
The dryer must be perfectly level to ensure that it
functions correctly.
The screw feet A can be adjusted to align it.
After aligning correctly you will need to use a
screwdriver to secure discs B to the floor plate.
Installation on a raised plinth
The dryer can be installed on a raised concrete
plinth.
,
If the machine is installed on an on-site plinth,
it must be secured using the fixing brackets
supplied. Otherwise there is the danger of the
machine moving and falling off the plinth.
^ Secure the front feet of the dryer with the clamps
supplied.
Installation and connection
Reducing the noise level
The dryer is fitted with an exhaust fan which can be
heard during operation.
If this noise disturbs you it is possible to fit a silencer
(available from Miele as an optional accessory) into
the dryer's exhaust duct (see "Installation
instructions).
Coin mechanism
The dryer can be fitted with a coin mechanism.*
A suitable adapter* is required for this. The machine
has to be reprogrammed by a Miele authorised
service technician.
Empty the coin box every day. This prevents too
many coins or tokens collecting in the coin box,
which could lead to the machine breaking down.
* available from your Miele Dealer or the Miele Spare
Parts Department.
Communication module XKM RS232
The dryer can fitted with a communication module
which enables it to be linked to a PC via a serial
interface.
The slot for the communication module is located on
the rear of the machine.
An editor programme is available from Miele.
29
Advertenties
Hoofdstukken
Inhoudsopgave
