Samenvatting van Inhoud voor Miele professional PT 8301 SL
Pagina 1
Operating instructions Dryers Gebruiksaanwijzing Droogautomaten PT 8301 SL PT 8303 SL en, nl - GB, NL To avoid the risk of accidents or damage to the machine it is essential to read these instructions before installing, M.-Nr. 07 985 420...
Gas-heated machines Safety precautions to take if you smell gas – Turn off the gas emergency control valve immediately. This is usually located near the gas meter. – Eliminate all sources of ignition in a safe manner. Do not smoke, light cigarette lighters or matches. –...
Warning and Safety instructions – items soiled with grease or oil which have not been properly cleaned beforehand. Use heavy-duty detergents where necessary to clean heavily soiled Explanation of the Warning and Safety garments, e.g. workwear. If necessary consult the symbols on the machine detergent manufacturer for advice.
Warning and Safety instructions The dryer must have a constant supply of fresh air. The drum door must be able to be opened to its Vapours containing chlorine, fluorine or other solvents fullest extent. This area must not be restricted by must not be able to reach the dryer.
Caring for the environment Disposal of the packing material Tips on saving energy The transport and protective packing has been Make sure that your laundry is thoroughly spun selected from materials which are environmentally before drying. This saves time and energy. friendly for disposal.
Guide to the machine a Control panel f Gas connection b Drum door g Gas heating indicator light Pull the door handle to open the drum door. This comes on when the heating is in operation. c Access to fluff filter h Air intake The fluff filter is opened with a key.
Drying Sort the laundry This can cause the drying process to go on for too long, or to not finish at all. Open zips before drying. Not all textiles are suitable for machine drying. Loopknit and woven textiles (e.g. T-shirts and Please read the instructions given on the garment underwear) have a tendency to shrink depending on their quality.
Drying This machine must only be installed and commissioned by a Miele authorised technician. For gas heated machines in the UK, this must be carried out by a Gas Safe registered technician. Before using for the first time Before loading the dryer with laundry, wipe the internal drum surface with a soft, dry cloth.
Dryer PT 8301 Selecting a temperature Drying High Cooling down Medium Programme finished / Anti-crease The programme sequence is displayed in three Cold stages. The stage the programme is at will be highlighted in yellow. At the end of the programme ^ Press the temperature selection button and select At the end of the programme a buzzer will sound to the required drying temperature - Cold, Low,...
Dryer PT 8303 Selecting a programme Lowering the temperature ^ When drying delicate fabric (such as acrylic), press the K Low temperature additional option button. ^ Press the START/STOP button. The drying programme will begin. The segment display will show the residual moisture which is currently in the laundry until the programme is finished.
After drying At the end of the programme To continue the drying programme: ^ Open the drum door. ^ Close the drum door. The remaining drying duration or the target residual If the door remains closed, the dryer will start up moisture level will flash in the segment display.
PT 8301 COP Control panel PT 8301 Profitronic B COP (Coin Operation) 1 Segment display - Time 2 Programme sequence display 3 Temperature selection button 4 Venting system fault indicator 5 Fluff filter fault indicator 6 START/STOP button 7 On/Off switch Time selection can be controlled by a C 4065 or C 4070 coin control unit or other type of payment system.
Reprogramming Reprogramming individual drying Example of reprogramming PT 8301 Profitronic B Timed programme machines programmes (Changing the Standard options) P 4 to alter the acoustic tone when a button is Individual drying programmes can be altered to suit pressed (see "Programmable functions"). specific requirements, practices and processes.
Pagina 17
Reprogramming Programmable functions Programmable function Standard Programmable option Buzzer volume 0 = quiet 1 = loud Buzzer at the end of the programme 0 = Off 1 = On Memory function 0 = Off 1 = On Acoustic tone which sounds when a button is pressed 0 = Off 1 = On P 5*...
Problem solving guide Error messages Indicator Possible cause Remedy Over-pressure in vent ducting. Check the vent ducting. Leaks in the airways. Call the Miele Service Department. Fluff filter blocked Clean the fluff filter. The dryer does not start. The fluff filter compartment flap is not Twist the lock for the fluff filter compartment closed properly.
Cleaning and care Fluff filter ^ The housing, control panel and any plastic components should be cleaned using a suitable Do not use the machine without the fluff filter in mild cleaning agent, applied with a soft damp place. Fire risk. cloth.
Installation and connection To ensure suitable access for future maintenance and This dryer must only be installed and service work, please ensure that the minimum commissioned by a Miele authorised technician. distances between the dryer and the wall specified on the installation diagram are strictly observed. This appliance must be installed in accordance with local and national safety and building regulations by a suitably qualified engineer (Gas Safe registered in...
Installation and connection Levelling the appliance To fit the language insert (programme selection) (PT 8303 only) The dryer does not require a plinth. However, make sure that any uneven areas of the floor are made level. The dryer must be perfectly level to ensure that it functions correctly.
Installation and connection Electrical connection Gas connection The electrical components of this dryer comply with This work must be carried out by an authorised IEC 335-1 and IEC 335-2-11. person in accordance with local and national safety regulations. This must be a Gas Safe registered The electrical connection may only be carried out by technician in the UK.
Technical data Model PT 830x EL/G Height in mm 1800 Width in mm Depth in mm 1063 Depth with door open in mm 1716 Weight in kg 138.8/145.4 Drum volume in l Max. capacity in kg (dry laundry) Voltage See data plate Connected load See data plate Fuse rating...
Gebruiksaanwijzing Droogautomaten PT 8301 SL PT 8303 SL nl - NL Lees beslist de gebruiksaanwijzing voordat u het apparaat plaatst, installeert en in gebruik neemt. M.-Nr. 07 985 420 Dat is veiliger voor uzelf en u voorkomt onnodige schade aan het apparaat.
Pagina 29
Inhoud Veiligheidsinstructies en waarschuwingen ............4 Een bijdrage aan de bescherming van het milieu .
Veiligheidsinstructies en waarschuwingen – wasgoed dat niet voldoende is gereinigd en dat met vetten of oliën verontreinigd is. Behandel ern- stig verontreinigd textiel (zoals werkkleding) met Toelichting op de veiligheidsinstructies speciale wasmiddelen. Neem hiervoor contact op en waarschuwingen op de automaat met uw wasmiddelenleverancier.
Veiligheidsinstructies en waarschuwingen Plaats de droogautomaat niet in één ruimte met De onderdelen van de stoomtoevoer (afhankelijk reinigingsautomaten waarin oplosmiddelen worden van het model) mogen niet worden aangeraakt. U gebruikt die CFK's bevatten. Door de vrijkomende kunt zich eraan branden. dampen kan zoutzuur ontstaan dat schade kan ver- Wacht tot de trommel stilstaat voordat u de was uit oorzaken aan het wasgoed en de automaat.
Veiligheidsinstructies en waarschuwingen Gasverwarmde droogautomaten Gebruik van toebehoren Sluit bij een storing en bij reinigings- of onder- Toebehoren mogen alleen worden aan- of inge- houdswerkzaamheden de gaskraan bij het apparaat bouwd, als ze uitdrukkelijk door Miele zijn vrijgege- en de hoofdkraan bij de gasmeter. ven.
Een bijdrage aan de bescherming van het milieu Het verpakkingsmateriaal - op de gewenste droogtegraad, - op restvochtigheid. De verpakking beschermt het apparaat tegen trans- portschade. Het verpakkingsmateriaal is uitgekozen Maak zoveel mogelijk gebruik van de maximale bela- met het oog op een zo gering mogelijke belasting van dingscapaciteit.
Algemeen a Bedieningspaneel f Gasaansluiting b Deur g Controlelampje gasverwarming Trek aan de deurgreep om de deur te openen. Brandt alleen als de verwarming ingeschakeld is. c Klep pluizenzeef h Opening luchttoevoer Gebruik een sleutel om de klep van de pluizenzeef te openen.
Beschrijving PT 8301 Bedieningspaneel PT 8301 Profitronic B (tijdgestuurd) 1 Segmentdisplay "Tijd" 2 Display "Programmaverloop" 3 Toets "Temperatuurkeuze" 4 Controlelampje "Luchtafvoer" 5 Controlelampje "Pluizenzeef" 6 Toets "START/STOP" 7 Draaiknop "Tijdkeuze" 8 Toets "Aan/Uit" Toets s "Aan/Uit" Segmentdisplay Met deze toets schakelt u de automaat in of uit. Het display toont voor de programmastart de inge- stelde droogtijd in minuten.
Beschrijving PT 8303 Bedieningspaneel PT 8303 Profitronic B Plus (restvochtgestuurd) 1 Segmentdisplay "Restvocht" 2 Display "Programmaverloop" 3 Toets "Temperatuur laag" 4 Controlelampje "Luchtafvoer" 5 Controlelampje "Pluizenzeef" 6 Toets "START/STOP" 7 Draaiknop "Programmakeuze" 8 Toets "Aan/Uit" Toets s "Aan/Uit" Segmentdisplay Met deze toets schakelt u de automaat in of uit. Het display toont voor de programmastart de rest- vochtwaarde in % die bij het programma hoort.
Drogen Voorbereiding Belangrijke aanwijzingen voor het drogen: Grote metalen delen (gespen, haken, oogjes, sluitin- Niet alle textielsoorten mogen in een droogauto- gen van ritsen, etc.) moeten voor het drogen in een maat worden gedroogd. Houdt u zich aan de aan- doek worden gewikkeld.
Drogen Alleen Miele of een geautoriseerde vakhandelaar mag de automaat plaatsen en in gebruik nemen. Vóór het eerste gebruik Reinig de binnenkant van de trommel met een zachte, droge doek, voordat u wasgoed in de droog- automaat doet. Automaat inschakelen en trommel vullen ^ Open de gaskranen (alleen bij gasverwarmde droogautomaten).
Drogen PT 8301 Temperatuur instellen Drogen Hoog Afkoelen Gemiddeld Programma-einde/kreukbeveiliging Laag Het display "Programmaverloop" toont het program- Koud maverloop in drie stappen. De betreffende program- mastap licht geel op. Programma-einde ^ Druk op de toets "Temperatuurkeuze" en stel de Als het programma-einde is bereikt, hoort u een zoe- gewenste droogtemperatuur in.
Drogen PT 8303 Programma kiezen Temperatuur verlagen ^ Druk bij kwetsbaar textiel (zoals acryl) op de toets K "Temperatuur laag". ^ Druk op de toets "START/STOP" en het droogpro- gramma start. Het segmentdisplay toont de actuele restvochtwaar- de tot aan het programma-einde. Drogen Afkoelen Programma-einde/kreukbeveiliging...
Na het drogen Na afloop van het programma Ga als volgt te werk om het programma voort te zetten: ^ Open de deur. ^ Sluit de deur. Als u de deur van de droogautomaat niet opent, Het segmentdisplay toont knipperend de resterende zal de trommel om veiligheidsredenen eens per 30 droogtijd c.q.
PT 8301 COP Bedieningspaneel PT 8301 Profitronic B COP (Coin Operation) 1 Segmentdisplay "Tijd" 2 Display "Programmaverloop" 3 Toets "Temperatuurkeuze" 4 Controlelampje "Luchtafvoer" 5 Controlelampje "Pluizenzeef" 6 Toets "START/STOP" 7 Toets "Aan/Uit" De functie "Tijdkeuze" kan worden overgenomen door de muntautomaat C 4065 of C 4070 of door andere afre- kensystemen.
Herprogrammering Het wijzigen van droogprogramma's door Voorbeeld herprogrammering PT 8301 Profitronic B (tijdgestuurd) herprogrammering (wijziging van de standaardopties) Wijziging instelling P 4 "Akoestisch signaal bij be- U kunt de droogprogramma's wijzigen en zo aanpas- diening toetsen" (zie tabel "Programmeerfuncties") sen aan uw specifieke wensen. ^ Draai de draaiknop "Tijdkeuze"...
Herprogrammering Programmeerfuncties (door de klant te programmeren) Programmeerfunctie Stan- Programmeeropties daard Volume zoemer 0 = zacht 1 = hard Zoemer programma-einde 0 = uit 1 = aan Memory-functie 0 = uit 1 = aan Akoestisch signaal bij bediening toetsen 0 = uit 1 = aan P 5* Instelling geleidbaarheid...
Nuttige tips Foutmeldingen Display Oorzaak Oplossing Overdruk in de luchtafvoer. Controleer de luchtafvoer. Lekkage in de luchtgeleiding. Neem contact op met Miele. Verstopte pluizenzeef. Reinig de pluizenzeef. U kunt de automaat niet De klep van de pluizenzeef is niet Draai de vergrendeling van de klep tot aan starten.
Reiniging en onderhoud Pluizenzeef ^ Reinig de ommanteling, het bedieningspaneel en de kunststof delen alleen met een mild reinigingsmiddel Gebruik de droogautomaat nooit zonder de of met een zachte, vochtige doek. Wrijf de delen ver- ingebouwde pluizenzeef. Brandgevaar! volgens weer droog. Een beschadigde zeef moet onmiddellijk worden vervangen.
Plaatsen en aansluiten Om latere onderhoudswerkzaamheden door Miele Alleen Miele of een geautoriseerde vakhandelaar eenvoudiger te maken, dient u rekening te houden mag de automaat plaatsen en in gebruik nemen. met de aangegeven minimale afmetingen en met de afstand tot de wand. Dit apparaat moet volgens de geldende voorschriften worden geïnstalleerd en mag uitsluitend in een ruimte worden gebruikt die voldoende wordt geventileerd.
Plaatsen en aansluiten Stellen Programmakaart plaatsen (folie programmakeuze in landstaal, De automaat hoeft niet op een speciale ondergrond alleen PT 8303) te worden geplaatst. Oneffenheden moeten wel wor- den gecompenseerd. De droogautomaat moet waterpas staan. Alleen dan kan de automaat goed functioneren. Trek de beschermfolie op het bedieningspaneel eraf.
Plaatsen en aansluiten Elektrische aansluiting Gasaansluiting De elektrische installatie van de droogautomaat vol- De gasaansluiting mag uitsluitend worden gereali- doet aan de normen IEC 335-1 en IEC 335-2-11. seerd door een erkend installateur, met inachtneming van alle geldende voorschriften. Zie de bijgevoegde Het apparaat mag uitsluitend op een volgens de installatiehandleiding.
Technische gegevens Type PT 830x EL/G Hoogte in mm 1800 Breedte in mm Diepte in mm 1063 Diepte bij geopende deur in mm 1716 Gewicht in kg 138,8/145,4 Trommelinhoud in l Max. capaciteit in kg (droge was) Aansluitspanning zie typeplaatje Aansluitwaarde zie typeplaatje Zekering...