Download Inhoudsopgave Inhoud Print deze pagina

To Avoid Accidents And Injuries; Specific Safety Instructions For Hot Glue Guns; Initial Start-Up; Inserting The Glue Stick - Parkside PHPA 20-Li A1 Vertaling Van De Originele Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

shocks and the risk of in-
jury and fire:
To avoid accidents and
injuries:
• This device is not intended for
use by children, individuals with
limited physical, sensory or
mental capabilities, those with
insufficient experience or know-
ledge or individuals who are
not familiar with the instructions.
Children should be supervised to
ensure that they do not play with
the device. Cleaning and mainte-
nance must not be carried out by
children.
• The device must not be used at
altitudes over 2000 m.
• Never let children or persons
who are not familiar with these
instructions use the machine.
Local regulations may restrict the
age of the operator.
• Never leave a machine which is
ready for operation unattended
at the workplace.
Specific safety instructions
for hot glue guns
• Children should be super-
vised to ensure that they
do not play with the de-
vice.
• CAUTION! This device must
be placed on its inserted
battery when it is not in
use
• Allow the device to cool
down completely before
putting it away.
• Do not use any materials
containing asbestos.
• Avoid risks of injury and
fire as well as any health
hazards: Risk of burn in-
jury! The nozzle heats up to
up to 180°C. The glue heats up
to up to 180°C. Do not touch
the nozzle or the glue. Do not
get any hot glue on people or
animals.
In case of contact with the skin,
immediately hold the burn site
under cold running water for se-
veral minutes. Do not attempt to
remove the glue from the skin.
• Do not attempt to pull the glue
stick back out of the device.
• Do not use any accesso-
ries that are not recom-
mended by PARKSIDE. This
can result in electric shock or
fire.

Initial start-up

Inserting the glue stick

From the back, insert a glue stick (2) into
the inlet channel (3) on the gun pushing it
as far as it will go. Make sure by pressing
the trigger (7) that the glue stick is in direct
contact with the heating element.
GB
IE
7

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave