Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Powering the radio
1. Battery operation
1. Installing the batteries, first turn battery cover fixture
anti-clockwise to loosen and open the battery cover.
Note:
Before you insert the batteries, if you use non
rechargeable batteries, make sure the NiMH/Alkaline
switch which located inside the battery compartment
is switched to Alkaline position.
If you use rechargeable batteries, make sure to
switch NiMH/Alkaline switch to NiMH position.
2. Insert 6 X AA size (UM-3) batteries into the
compartment. Ensure the batteries are inserted in
accordance with the diagram shown.
Close the battery cover and fasten the fixture by
turning clockwise.
If the radio is not to be used for any extended period
of time, it is recommended that the batteries are
removed from the radio.
Reduced power, distortion, a stuttering sound or
"LOWPOWER"
signs that the batteries need replacing or recharging.
(see below information on charging the batteries).
When playing on (rechargeable) batteries the output
power is less compared to the output power when
playing on AC mains power. Because of this the
sound can be somewhat distorted at the highest
volume settings.
flashing on the display are all
GB
6
Advertenties
Inhoudsopgave
