Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Mains connection
Before you connect the complete PA system to the power supply
grid, make sure that the POWER switch (8) is switched off (posi-
tion "O").
Insert the non-heating appliance plug of
the mains cable into the mains connec-
tion (9). Insert the mains plug into a
mains socket.
The POWER switch (8) is used to switch
the complete PA set on and off.
Operation
After you have made all the connections and checked everything again, your com-
plete PA set is ready for use.
Turn the controls MAIN LEVEL (1) and
SUB LEVEL (3) down completely.
Switch on the connected mixer and start
the playback.
Switch on the PA complete set with the
POWER switch (8).
Adjust the volume on the mixer to about
75% of the maximum volume or to the
maximum undistorted level (visible on
devices with recording level displays
and the „0 dB" marking).
Position „O":
Device is switched off.
Position „I":
Device is turned on.
When the device is switched on, the
POWER indicator (4) lights up.
Turn to left stop
Set to a medium volume on the mixer.
Switch to „I" position
27
Advertenties
Hoofdstukken
Inhoudsopgave
