Inhoudsopgave
Advertenties
Fitting top tank
3
Fitting the brush
Featuring the Nulock brush system.
The brush is simply pushed and twisted to lock, making fitting and removal a simple process.
The Pad is retained using Numatic's own PadLoc system (ask your supplier for details).
Only use manufacturer supplied brushes / pads.
TT 4045G requires a 450mm brush or a 400mm pad.
TT 4055G requires a 550mm brush or a 500mm pad.
5
Safety gloves are recommended for the changing of used brushes.
Tipping the Brush Deck
7
!
ALWAYS ENSURE THAT THE MACHINE IS SWITCHED OFF
Fit the top tank to the machine
(Fig.3).
Fit both the vacuum hose and the floor-tool
Fit the brush / pad to the drive chuck,
twist to lock the brush (Fig.5)
or pad in place (Fig.6).
To tip the deck into the down position
(Operating mode): Press in the brush deck
locking pin (Fig.7) and rotate the brush
deck (Fig.8).
To change to brush deck up position,
(Transit mode) simply lift the deck and the
sprung loaded locking pin will activate to
hold the deck up.
BEFORE MAKING ANY ADJUSTMENTS
hose to the separator
(Fig.4).
7
Machine Set Up
4
6
8
!
Advertenties
Inhoudsopgave
