Download Inhoudsopgave Inhoud Print deze pagina

General Safety Instructions - Parkside PASB 44 A1 Beknopte Handleiding

Led-werkschijnwerper
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

General safety
instructions
BEFORE USING THE PRODUCT, FAMILIARISE
YOURSELF WITH ALL OF THE SAFETY
INFORMATION AND INSTRUCTIONS FOR
USE! WHEN PASSING THIS PRODUCT
ON TO OTHERS, ALSO INCLUDE ALL THE
DOCUMENTS!
WARNING!
AND RISK OF ACCIDENTS FOR
INFANTS AND CHILDREN!
Never leave children unsupervised with the
packaging material . Always keep children away
from the packaging material .
This product may be used by children aged
 
8 years and up, as well as by persons
with reduced physical, sensory or mental
capacities, or those lacking experience and/
or knowledge provided they are supervised
or instructed in the safe use of the product
and they understand the associated risks . Do
not allow children to play with the product .
Cleaning and user maintenance must not be
performed by children without supervision .
This product is not a toy and should be kept
 
out of the reach of children . Children are
not aware of the dangers associated with
handling electrical products .
m
DANGER! RISK OF SUFFOCATION!
Children could swallow and choke on small
included parts (e .g . screws) . Keep children
away from the work area during assembly .
Do not use the product if you detect any type
 
of damage .
Never immerse the product in water or other
 
liquids!
Do not carry out any modifications or repairs
 
to the product yourself . The built-in LED
module and built-in LED driver cannot be
replaced .
8
GB/IE/NI
DANGER TO LIFE
If the LEDs fail at the end of their lives, the
 
entire product must be replaced .
The mains cord of this product cannot be
 
replaced . If the mains cord is damaged, the
product shall be destroyed .
Danger to life by electric shock
Always check the product for damage before
 
connecting it to the mains . Never use the
product if it shows any signs of damage .
Protect the mains cord against sharp edges,
 
mechanical stresses and hot surfaces .
Always unplug the mains plug from the socket
 
before cleaning .
Disconnect the product from the mains supply
 
if it is not going to be used for some time (e .g .
holiday) .
Verify that the mains voltage on site
 
corresponds with the operating voltage
required for the product (230 V∼, 50 Hz),
before you use it . Otherwise do not use the
product .
m
CAUTION! RISK OF BURN INJURIES!
To prevent burns, verify the product is
switched off and has cooled down for at least
15 minutes before touching it . The product
can become very hot .
The accessible surface, is very hot when the
 
lamp is operating .
FIRE HAZARD! Fit the product
so that it is at least 1 .0 metre away
1 .0 m
from the material to be illuminated .
Excessive heat can result in a fire .
WARNING!
 
when the product is facing down to a
combustible surface . The exposed surface
may be overheated or ignited .
Do not place burning candles or open fire on
 
or near the product .
Do not turn on the light

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Hg10492Hg10492-frHg10492-ch

Inhoudsopgave