Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Instructions for use
Cleaning method
After starting up, the cleaner will scan to generate a
map. the cleaning path will be planned by cleaning
along the wall first, and then mapping in a "Z" path,
and the cleaning of each partition will be completed
one by one. The cleaner will automatically return to the
charging base for charging.
Area 1 has been cleaned
Area 4 to be cleaned
Area 2 has been cleaned
Area 3 is being cleaned
Cleaning mode:
By App, user can choose between quiet, standard and powerful modus.
The default mode is standard mode.
Do Not Disturb mode:
During the Non-disturb period, the cleaner will not automatically
resume scanning and perform scheduled cleaning. The Non-Disturb
mode is turned off by default at the factory. You can use the App to
turn it on and set the Non-Disturb period.
Area cleaning:
Use the mobile App to set up the area cleaning function,and the
cleaner will clean according to the area planned on the mobile phone.
Sleep:
If there is no operation for more than 10 minutes, the cleaner will
automatically enter the sleep state. In the sleep state, the cleaner
light is off. Press any key in the sleep state to wake up the cleaner.
Note:
The cleaner will not enter sleep mode when charging on the
charging stand and will automatically shut down if the sleep
time exceeds 12 hours.
9
.
Advertenties
Inhoudsopgave
