Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Install
Start cleaning
1
Start cleaning
.
When the cleaner power-on indicator light stays on, it means
charging is complete. Short press the button or use the mobile
client to start cleaning.
Power on/off
Press and hold to power on, the ring indicator light
and the cleaner will enter standby. When the cleaner is at rest,
press and hold the button
machine is shut down, the cleaning will end.
Note: The cleaner cannot be shut down while charging
Cleaning:
Short key
to start cleaning
(see the picture on page 9 for the cleaning method)
Press any key to pause during cleaning
will light up,
to turn off the machine. After the
Instructions for use
Note:
If the power is too low , it will not be able to start cleaning.
Please charge first and then start cleaning. When the power is
insufficient during the cleaning process, the cleaner will
automatically return to the charging stand for charging. When
the power is sufficient, it will automatically return to the
stopped place to continue cleaning.Please arrange all kinds of
wires on the ground (including the power cord of the charging
stand) before cleaning, so as to avoid entangled with each other
during cleaning, which will cause electrical power failure,
damage items or wires.If the cleaning time is less than 15㎡, it
will be cleaned twice by default.
Charging
Automatic mode: After cleaning, the cleaner will automatically
return to the charging stand for charging
Manual mode: In the pause mode, short press
When the cleaner is charging, the charging icon
flashes
Note:
If the cleaner does not find the charging stand, it will automatically
return to the starting point, please manually put the cleaner back
to the charging stand for charging.
8
to start recharging
yellow light
Advertenties
Inhoudsopgave
