Inhoudsopgave
Advertenties
!
PLEASE READ BEFORE COMMENCING ANY OPERATION AFTER THE REMOVAL OF
ALL THE PACKAGING, CAREFULLY OPEN AND CHECK THE CONTENTS.
TGB 6055/100
CONTENTS
● 2 x Ignition Keys ● 2 x 40 Amp Fuse
(Battery) ● 1 x 30 Amp Fuse (Brush)
● 1 x 20 Amp Fuse (Vac)
● 1 x 2.5 Amp Fuse ● Maxi Fuse-puller
For Charger-less Model,
all the above plus:
● 1 x Charger Connector
Charger Connector Terminals
● 4 x Battery Terminal Connector covers
● 1 x Fuse Holder
Lift top tank assembly to reveal battery
compartment, ensuring you use the handle grip
provided.
Fit battery fuse (contained in start-up pack) into
the battery fuse holder as illustrated.
(Fig. 1, 2, 3.)
Insert Key into ignition located on the
control panel (See below (Fig. A)
Note: Wear suitable gloves when inserting
fuses.
1
Ensure that no metal objects come into contact with
battery terminals while the batteries are exposed.
When inserting the first fuse you may notice
a spark, this is normal.
Use handle grip when
raising or lowering the
top waste-tank.
● 2 x
2
Insert the Ignition key and
A
switch the machine on.
(Fig. A)
Using the control handle with both hands,
slowly push the machine off the pallet.
When the machine is removed and in a safe position,
Note: Do not pull the RED trigger handle while in
During vehicular transportation ensure the product is
secured to avoid unnecessary movement.
Machine Set-up Guide
3
B
release the control handle.
transport mode (Fig. B)
7
!
Fuse Location
Advertenties
Inhoudsopgave
Probleemoplossen
