Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7. Mounting accessories
- Adjustable shelves
The walls of the appliance are equipped with a series of guide profiles so
that the shelves can be inserted if desired.
- Installing the door compartments
To store food of different sizes, the door compartments can be set to different
heights. Proceed as follows: gradually pull the compartment in the direction
of the arrows until it comes loose and put it in the desired position.
8. Storing food
See Section 4 "Use".
3.2 REVERSING THE DIRECTION IN WHICH THE DOOR OPENS
When you remove the door, tilt the appliance backwards. We recommend doing this with two people. Rest the
appliance with the back on a soft surface to avoid damaging it while you reverse the door.
Keep all removed parts to reinstall the door later. During this process, the refrigerator lies flat on its back. After this,
wait four hours before connecting the appliance to allow the oil to flow back to the compressor first.
Necessary tools:
•
Crosshead screwdriver
•
Flathead screwdriver
1. Remove the plug from the socket
and empty the appliance.
2. Remove the hinge cover on
the top right side of the door.
First unscrew the screws and
disconnect the wiring. Remove
the screw cover on the top left.
Then remove the upper door
from the right hinge and lay
it on a soft surface to avoid
scratches and damage.
•
Adjustable spanner
•
Allen key
30
Advertenties
Hoofdstukken
Inhoudsopgave
