Advertenties
Beschikbare talen
Beschikbare talen
• Localising a Complete Electronic Installation
Note: Switch off the fuses and power down the whole system. This measurement requires manipulating the main
electrical distribution system and must only be performed by an electrician.
With the cable detector, all present outlets and cables can be determined and checked for contact.
Remove the main distribution bridge between the protective conductor "PE" and the neutral conductor "N".
Connect the transmitter to the distribution main of "N" and "PE".
The neutral conductor can be traced through the complete system with the receiver.
• Tracing Lines at a Deeper Position
Switch off the fuse and power down the electrical circuit.
For the two-pole measuring method, interference signals from nearby cables can influence readings.
This is reflected in a lower search depth.
To prevent this problem, you can use an additional power cable for the return (e.g., an extension, cable drum, etc.).
44
Advertenties
