Advertenties
Beschikbare talen
Beschikbare talen
LSG-10 receiver:
1 Sensor probe
2 LED torch
3 Display
4 "NCV" button for switching between cable detection
mode and contact-free AC voltage detection
5 Button for torch function (On/Off, switches off
automatically after approx. 1 min.)
6 Down button for manual sensitivity settings
LSG-10B transmitter
12 "Phase/+" connection socket
13 Connection socket reference potential (earth)
14 Display
15 Button for signal level settings (level I, II or III) and
backlight (press for 2s)
LSG-10 receiver display:
a Signal strength display
b Grid voltage indicator
c Display for manual sensitivity selection
d Transmission code display
e Signal level display (I, II or III)
f Acoustic tones are disabled
g Signal strength display
LSG-10B transmitter display
m Voltage display
n Transmission code display
o Signal level (I, II or III) display
7 MODE buttons for toggling between automatic and
manual mode
8 Button for switching the beep tones and backlight on
and off
9 Up button for manual sensitivity settings
10 Power button (On/Off)
11 Battery compartment (rear side)
16 Power button (On/Off)
17 Battery compartment (rear side)
h Sensitivity display (many arches = low sensitivity; few
arches = high sensitivity)
i
Backlight enabled
j
Automated sensitivity selection enabled
k Battery status indicator (4 bars = battery full; <1 bar =
battery empty)
l
Contact-free AC voltage detection enabled
p Battery replacement indicator
q Grid voltage indicator
35
Advertenties
