Advertenties
Beschikbare talen
Beschikbare talen
If the line resistance exceeds 20 Ohm, you can try using the search method
described for a cable break.
• Tracing Installer Water Pipes
Disconnect the water pipes to be traced from the potential balancer rail.
Switch off the fuse and power down the system.
Connect one measuring socket of the transmitter to the potential balancer.
Place the second connection right on the water pipe/metal pipe to be traced.
Trace the pipe's course with the receiver.
• Finding Heating Tubes in the Floor
For optimal results, the heating pipes should be disconnected from the earth connection.
Connect the transmitter to the heater's metal pipe and an earth connection.
Note: Suitable earth connections are any power outlet protective conductors.
Trace the pipe's course with the receiver.
43
Advertenties
