Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operating Instructions
Ventilation position
Note
This function is used to move your roller shutters from the lower fi nal
position upwards in order to open the ventilation slats. The ventilation
position can only be set after the two fi nal positions have been set.
The shutter is adjusted into the ventilation position from the lower fi nal
position.
Setting the ventilation position
1. Adjust the shutter into the desired ventilation position from the lower fi nal po-
sition.
2. Now press and hold the STOP button. Within 3 seconds also press the UP
button and keep both buttons pressed.
The shutter will "nod" to confi rm.
The ventilation position has been stored.
Adjusting the shutter into the ventilation position
1. Press the UP button twice within one second.
The shutter will move into the ventilation position.
Deleting the ventilation position
1. Adjust the shutter into the ventilation position.
2. Now press and hold the STOP button. Within 3 seconds also press the UP
button and keep both buttons pressed.
The shutter will "nod" to confi rm.
The ventilation position has been deleted.
26
Advertenties
Inhoudsopgave
