Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATING THE STAND MIXER
Removing the bowl and beaters
Turn speed control to "0" (OFF), and
1
unplug Stand Mixer.
Press the beater up as far as possible
3
and turn left, then pull beater from
the beater shaft.
TIPS FOR GREAT RESULTS
Stand Mixer use
PERSONAL INJURY HAZARD
To avoid personal injury and
damage to the beater, do not
attempt to scrape bowl while
mixer is operating; turn mixer
off. Should scraper or other
object drop into bowl, turn
motor OFF before removing.
12
Lower the bowl to the down position.
2
Grasp the bowl handle and lift it straight
4
up and off the locating pins.
The bowl and beater are designed to provide
thorough mixing without frequent scraping.
Scraping the bowl once or twice during
mixing is usually sufficient.
The Stand Mixer may become warm during
use. Under heavy loads with extended
mixing time periods, you may not be able
to comfortably touch the top of the Stand
Mixer. This is normal.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
