Download Inhoudsopgave Inhoud Print deze pagina

Assembly Of Glass Pane In Door; Frames; Adjustable Feet - Dik Geurts Instyle 800V Installatiehandleiding

Verberg thumbnails Zie ook voor Instyle 800V:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

9.5.2 Assembly of glass pane in door

Assemble the glass pane in the door according to the steps described in paragraph 9.5.1 'Disassembly of glass
pane in door' but in reverse order.
For a Prostyle appliance: see appendix 2, fig. 17. For an Instyle appliance: see appendix 2, fig. 18):
Assembly of the door is somewhat different.
!Caution
Proceed as for assembly of the door:
Ø
Bring the hole at the bottom of the hinging part of the door exactly below the lower pin.
Ø
Slide the door up. The pin slides into the lower hole.
Ø
Bring the hole at the top of the hinging part of the door exactly above the upper pin and allow the door to lower.
The pin slides into the upper hole.
Ø
The door is now assembled.
!Caution

9.6 Frames

The appliances can be fitted with various frames. The frames are adjustable in depth and can be fitted so they are
parallel to the door.
The installation depth of the appliance depends on the selected frame (see Annex 2, fig. 1)!
!Caution
When assembling the frame proceed as follows:
First remove the door before assembling the frame.
Tip!
Frames Modern and Classic:
Ø
Loosen the 4 pre-assembled bolts (see Appendix 2, Fig. 19).
Ø
Slide the frame in the convection casing between the loosened bolts and the bolts still tight in the appliance
(see Appendix 2, Fig. 20).
Ø
Tighten the nuts. The frame is now clamped between the nuts (see Appendix 2, Fig. 21).

9.7 Adjustable feet

The 2 front adjustable feet are not adjustable from inside. On these adjustable feet there is a hexagonal nut that is
adjusted from outside with an open-end spanner. The rear adjustable feet are accessible after the removal of the
vermiculite plates lying on the bottom.
Adjust the front feet before assembling the frame.
Tip!
42
Do not fasten the bolts too tight to avoid breaking off and/or stripping: overtightening will cause breakage.
Place the glass pane (including new pane seal) with the logo to the bottom right.
I N S T A L LA T I ON M A N U A L

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Instyle 1000vProstyle 800vProstyle 1000v

Inhoudsopgave