Assembly; Programming The Transmitter; Programming The Master Transmitter - Becker Centronic VarioControl VC220 Montage- En Gebruiksaanwijzing

Verberg thumbnails Zie ook voor Centronic VarioControl VC220:

Inhoudsopgave

Advertenties

Beschikbare talen

The radio receiver can be installed in or on the head rail of a sun protection

system, for example.

Connect the radio receiver to the power supply and to the lighting sys-

tem.

Now switch on the power.

The radio receiver remains in programming mode for 3 minutes.

The master transmitter refers to the very first transmitter

programmed in a receiver. In contrast to subsequently pro-

grammed transmitters, the master transmitter enables,

among other things, the setting of limit positions (for drives

with integrated radio receiver) and the programming or de-

leting of further transmitters. Any transmitter that has separ-

ate UP, STOP, DOWN buttons and a programming button can

be a master transmitter.

If a transmitter is already programmed in the receiver, press

the programming button of the transmitter for 10 seconds.

Press the programming button of the transmitter for 3 seconds whilst in pro-

gramming mode.

► The receiver confirms.

Programming is now complete.

Assembly

17 - en

Inhoudsopgave

Advertenties

Inhoudsopgave