Energy Yield; Fan - Fronius Primo 3.0-1 Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor Primo 3.0-1:
- Bedieningshandleiding (176 pagina's) ,
- Installatiehandleiding (48 pagina's) ,
- Gebruiksaanwijzing (172 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Energy yield
Setting
-
-
-
-
Setting range
Meter deviation
Input of a value for the fed-in energy that will be added to the energy currently fed in (e.g.
carry-over value when replacing an inverter)
Unit
Setting range
Factory setting
Meter calibration
Input of a correction value to ensure that the value shown on the inverter display corre-
sponds with the calibrated display on the electricity meter
Unit
Setting range
Factory setting
Currency
Set the currency
Setting range
Feed-in tariff
Set the remuneration rate for energy fed into the grid
Setting range
Factory setting
Fan
To check that the fan is working correctly
Setting range
-
-
-
of an OFFSET value for the total energy display
of a measuring offset factor for the day, year and total energy display
of the currency
of the feed-in tariff
Meter deviation / Meter calibration / Currency / Feed-in tariff
Wh / kWh / MWh
Five digits
0
%
-5.0 - +5.0
0
3 characters, A-Z
2 digits, 3 decimal places
(depends on country setup)
Test fan #1 / Test fan #2 (depending on the device)
Use the 'Up' and 'Down' keys to select the desired fan
Testing of the selected fan is initiated by clicking 'Enter'.
The fan will continue to run until the operator exits the menu by pressing 'Esc'.
33
Advertenties
Hoofdstukken
Inhoudsopgave
