Datcom; Usb - Fronius Primo 3.0-1 Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor Primo 3.0-1:
- Bedieningshandleiding (176 pagina's) ,
- Installatiehandleiding (48 pagina's) ,
- Gebruiksaanwijzing (172 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
DATCOM
Checking data communications, entering the inverter number, DATCOM night mode, pro-
tocol settings
Setting range
Status
Indicates data communication is taking place via a Fronius Solar Net or that a data com-
munications error has occurred
Inverter number
Sets the number (= address) of the inverter in a system with several solar inverters
Setting range
Factory setting
IMPORTANT! If a number of inverters are linked together in a data communications sys-
tem, assign a unique address to each one.
Protocol type
Specifies the communications protocol to be used to transfer the data:
Setting range
Factory setting
* The protocol type 'interface protocol' only functions when there is no Datamanager card
in the inverter. All Datamanager cards must be removed from the inverter.
USB
Specification of values in conjunction with a USB flash drive
Setting range
Safely remove HW
To remove a USB flash drive from the USB A socket on the plug-in data communications
card without losing any data.
The USB flash drive can be removed:
-
-
Software Update
Inverter software is updated via a USB flash drive.
Procedure:
1
***
WiFi Access Point
[not available]
Displayed if there is no system monitoring present on the invert-
er.
Status / inverter number / protocol type
00 - 99 (00 = 100th inverter)
01
Fronius Solar Net / interface protocol *
Fronius Solar Net
Safely remove HW / Software update / Logging interval
If the OK message appears
If the 'Data transfer LED stops flashing or comes on steady
Download the relevant update file 'froxxxxx.upd'
(e.g. from http://www.fronius.com; xxxxx stands for the version number)
27
Advertenties
Hoofdstukken
Inhoudsopgave
