Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. Use
4.2 Filling the water tank
Remove the plug from the filling hole located at the top of the water tank. Fill a bucket with
tap water and add a chlorine tablet if the rower will be located at a site with direct sunlight.
Fasten the knob on the included syphon (a) and place the syphon inside the bucket and the
other end inside the water tank (b). Now squeeze on the red part of the syphon to pump
water from the bucket into the water thank. Usually after 4 to 5 presses, the siphon pump
starts pumping. The amount of water inside the tank will determine the level of resistance
during the rowing exercise. Rotate the handle counterclockwise (c) to allow air to enter the
pump and stop pumping.
It is strongly recommended to place a cloth or a blanket underneath the water tank when
filling the rower with water or whenever the tank plug is opened for water treatment.
38 - Manual Driver DWR2500i
Advertenties
Hoofdstukken
Inhoudsopgave
